a transportation system between work areas … alternative suggestions considered
-
Container / wrap type:
Other (please specify below)
-
Product type:
Metal Parts - Oily
-
Description:
various machined parts
-
Shape (if not standard):
various
-
Total Volume Dimensions (attach drawings to the previous section):
-
Material type:
Metal
-
Surface texture:
Oily
-
Surface finish:
Matt
-
Weight:
various
-
Additional product information:
-
How will the product be presented (eg will an operator be presenting the part or will it be positioned in a fixture (either by an operator, or a robot):
operator
-
How will the product be oriented (can it be upside down? Through 360 degrees?):
any orientation (can be changed)
-
If track, modular or chain - do you need carriers, if so, what type ?:
no carriers
-
Do you need a synchronous or non-synchronous system?:
Non-Synchronous
-
Belt, Slat, Chain, Modular or Roller Conveyors?:
Chain
-
Width (mm/m):
TBD
-
Length (mm/m):
TBD
-
Height (mm/m):
TBD
-
Free, Powered or Gravity fed?:
Powered
-
Continuous motion or indexed / intermittent:
Continuous
-
Linear line speed required (m/min):
TBD
-
Dwell time - If intermittent/indexed, what is the dwell time required (unless trigger is needed) - min/sec:
-
Part throughput required (number of items per minute / second):
-
Is a variable speed required? (m/min; mm/sec):
-
Is a ramp up/ramp down time critical, if so, what is it? (seconds/minutes):
-
Additional conveyor information:
-
Trigger signal:
External analogue trigger
-
Encoder input or fixed speed:
N/A
-
Output required:
None
-
Other / Output Details:
-
How many digital inputs / outputs do you need (please specify In / Out)?:
-
What (if any) information do you need the system to output?:
-
Additional Communication & Data Processing Requirements:
-
What type of solution do you need:
Turnkey - do it all for us, show us where the the on button is, and support its operation
-
Does it need to meet any standards (eg CFR 21 Part 11, ATEX, CE, please state all that apply):
-
Is a specific IP rating required (find out more about this in our learn section):
-
Do you need the system to be completely integrated with some other equipment:
-
Do you need the equipment to be new or used:
New
-
Are there any environmental conditions the equipment needs to withstand:
-
Do you need after sales technical support, if so, how long for:
-
At least how long do you need the warranty to be:
-
Additional project details: