Two level and linear conveyor system
Project Description

A two level and linear conveyor system to move boxes around a factory. We have the total space its required in but don’t know what we need (a visit would be great).

  • Container / wrap type:


  • Description:

    Boxes of various sizes

  • Shape (if not standard):

  • Total Volume Dimensions (attach drawings to the previous section):


  • Max Weight:


  • Additional product information:

    Boxes range from 200x200x100mm to 600x600x600

  • Track, Crane, Chain or Screw conveyor?:


  • Belt, Slat, Chain, Modular or Roller ?:


  • If track, modular or chain - do you need carriers, if so, what type ?:

  • Do you need a synchronous or non-synchronous system?:


  • How will the system need to be mounted?:

    Floor mounted

  • Width (mm/m) - if you need it to be adjustable, state the extremes:


  • Length (mm/m) - if you need it to be adjustable, state the extremes:


  • Height (mm/m) - if you need it to be adjustable, state the extremes:

    two levels 2.5m apart

  • Free, Powered or Gravity fed?:


  • Continuous motion or indexed / intermittent:


  • Linear line speed required (m/min):

    Not sure yet

  • Dwell time - If intermittent/indexed, what is the dwell time required (unless trigger is needed) - min/sec:

  • Part throughput required (number of items per minute / second):


  • Do you need the conveyor speed to vary. If so, state the extremes (m/min; mm/sec):

  • Is a ramp up/ramp down time (how fast it speeds up / slows down) critical? if so, what is it? (seconds/minutes):

  • Additional product handling information:

  • Trigger signal:

    external digital trigger

  • Encoder input or fixed speed:

    Encoder input

  • Output required:


  • Other / Output Details:

  • How many digital inputs / outputs do you need (please specify In / Out)?:

  • What (if any) information do you need the system to output?:

    part presence signals at various locations

  • Additional Communication & Data Processing Requirements:

  • What type of solution do you need:

    Equipment, mounting brackets & technical support - we like to think we know how it all works but need a lot of hand holding

  • Does it need to meet any standards (eg CFR 21 Part 11, ATEX, CE, please state all that apply):

  • Is a specific IP rating required (find out more about this in our learn section):


  • Do you need the system to be completely integrated with some other equipment:

    offload sections from various manual operation cells

  • Do you need the equipment to be new or used:


  • Are there any environmental conditions the equipment needs to withstand:

  • Do you need after sales technical support, if so, how long for:

    5 years

  • At least how long do you need the warranty to be:

    2 years

  • Additional project details:

No proposals placed yet.
Image Gallery
Map Location