We need a robot to be able to unload products then stack pallets (when they are empty)
-
Description:
Small boxes
-
Total Volume Dimensions (attach drawings to the previous section):
various
-
Type of robot:
Pick-and-place
-
Other Robot (please elaborate below):
-
Do you need the robot to be a collaborative type?:
Yes
-
Robot operation description (what's it going to do?):
unload pallets, then stack the empty pallets
-
What type of coordinate frame do you need (select:
Not sure / Not listed
-
What is the total work envelope size (Volume W x H x L, m / mm) ?:
TBC
-
Number of degrees of freedom required (ignore if you don't know)?:
-
What end effector is needed?:
Gripper
-
Other end effector (what do you need on the end of the robot)?:
-
What payload does it need to handle, not including the end effector (g/kg):
The pallet will be the heaviest thing
-
What is the total reach that’s needed (m / mm) ?:
TBC
-
How precise does the system need to be (m/mm/micrometers)?:
5mm
-
What level of repeatability is needed (m/mm/micrometers)?:
5mm
-
Is there a space restriction. ie whats the maximum volume the whole thing can take up? (W x H x L, m / mm):
No
-
How fast do you need the robot to be ? (robot arm velocity m/s or mm/s):
TBC
-
What cycle time is needed? (minutes / seconds):
TBC
-
Any additional robot information ?:
-
What type of solution do you need:
Equipment, mounting brackets & technical support - we like to think we know how it all works but need a lot of hand holding
-
Does it need to meet any standards (eg CFR 21 Part 11, ATEX, CE, please state all that apply):
CE
-
Do you need the equipment to be new or used:
New
-
Are there any environmental conditions the equipment needs to withstand:
Ambient, factory environment
-
Do you need after sales technical support, if so, how long for:
as long as the life of the system
-
At least how long do you need the warranty to be:
3 years
-
Additional project details: