Scara Robot for electronic assembly
Project closed for price: €40,000.00
Project Description

We need to assemble very small parts on a PCB ready for the soldering oven

  • Description:

  • Total Volume Dimensions (attach drawings to the previous section):

    1m x 0.5m

  • Type of robot:


  • Other Robot (please elaborate below):

  • Robot operation description (what's it going to do?):

  • What type of coordinate frame do you need (select:


  • What is the total work envelope size (Volume W x H x L, m / mm) ?:

  • Number of degrees of freedom required (ignore if you don't know)?:

  • What end effector is needed?:


  • Other end effector (what do you need on the end of the robot)?:

  • What payload does it need to handle, not including the end effector (g/kg):

  • What is the total reach that’s needed (m / mm) ?:

  • How precise does the system need to be (m/mm/micrometers)?:

  • What level of repeatability is needed (m/mm/micrometers)?:

  • Is there a space restriction. ie whats the maximum volume the whole thing can take up? (W x H x L, m / mm):

  • How fast do you need the robot to be ? (robot arm velocity m/s or mm/s):

  • What cycle time is needed? (minutes / seconds):

  • Any additional robot information ?:

  • What type of solution do you need:

    Equipment, mounting brackets & technical support - we like to think we know how it all works but need a lot of hand holding

  • Does it need to meet any standards (eg CFR 21 Part 11, ATEX, CE, please state all that apply):

    CE, must be ESD safe

  • Do you need the equipment to be new or used:


  • Are there any environmental conditions the equipment needs to withstand:

    It will be temperature controlled

  • Do you need after sales technical support, if so, how long for:

    5 years

  • At least how long do you need the warranty to be:

    2 years

  • Additional project details:

15-Feb-2017 21:22:17
23 days
Project Winner
14-Feb-2017 12:03:16
60 days
Image Gallery
No images.
Map Location