Test robot to develop trunnion manufacturing methods
Project Description

We need a articulated robot that can handle very heavy payloads

  • Description:


  • Total Volume Dimensions (attach drawings to the previous section):

    Various vehicle sizes / shapes

  • Type of robot:

    Other (please specify below)

  • Other Robot (please elaborate below):

    It will be handling the vehicle for various operations

  • Do you need the robot to be a collaborative type?:


  • Robot operation description (what's it going to do?):

    Its going to "present" the vehicle to different tools / cells for processes to be carried out to it

  • What type of coordinate frame do you need (select:

    Articulated Arm / 6 Axis

  • What is the total work envelope size (Volume W x H x L, m / mm) ?:

    Various (TBC)

  • Number of degrees of freedom required (ignore if you don't know)?:

  • What end effector is needed?:

    Other special device (specify below)

  • Other end effector (what do you need on the end of the robot)?:

    It will be a custom made pallet / gripper

  • What payload does it need to handle, not including the end effector (g/kg):

    The weight of a fully assembled vehicle

  • What is the total reach that’s needed (m / mm) ?:


  • How precise does the system need to be (m/mm/micrometers)?:

    within 5mm (initial requirement, this may change)

  • What level of repeatability is needed (m/mm/micrometers)?:

    within 5mm (initial requirement, this may change)

  • Is there a space restriction. ie whats the maximum volume the whole thing can take up? (W x H x L, m / mm):


  • How fast do you need the robot to be ? (robot arm velocity m/s or mm/s):


  • What cycle time is needed? (minutes / seconds):

    Not relevant

  • Any additional robot information ?:

  • What type of solution do you need:

    Equipment, mounting brackets & technical support - we like to think we know how it all works but need a lot of hand holding

  • Does it need to meet any standards (eg CFR 21 Part 11, ATEX, CE, please state all that apply):

    EU manufacturing standards

  • Do you need the equipment to be new or used:


  • Are there any environmental conditions the equipment needs to withstand:

    Ambient but dry

  • Do you need after sales technical support, if so, how long for:

    10 years at the very least

  • At least how long do you need the warranty to be:

    5 years

  • Additional project details:

No proposals placed yet.
Image Gallery
No images.
Map Location